Industrial Doors // Roller Shutter Doors // Accessories

 Seals
 All roller shutter doors can be provided with nylon brush strip seals for fitting at soffit level and/or along the vertical guide
 channels. A rubber extrusion floor seal can also be provided for the bottom rail to ensure closing or uneven floor levels,
 and help prevent the ingress of water.

 Wicket Doors
 Installed on either side of the curtain a wicket door provides safe and secure pedestrian access through the roller
 shutter door when lowered. The whole assembly is independently side hung and swings clear when the roller shutter
 door requires raising.

 The door is manufactured from welded section and fitted with shutter laths to match the rest of the curtain. Standard
 fittings include a ball type catch and night latch lock. On electrically operated doors an interlock switch prevents
 operation when the wicket door is in position.

 Hoods / Fascias / Soffit Panels
 A casing box that is manufactured from galvanised or plastisol steel sheet covers the coil and protects the curtain and
 barrel from the elements. Front fascia and soffit panels are also available to conceal the coil assembly.

 Locking devices
 All manually operated roller shutter doors can be fitted with a wide variety of locking devices such as bullet locks, shoot
 bolts, centre locks, lateral locks, grille locks or ground unit locks. On all electrically operated roller shutter doors, with
 locks, an interlock switch is recommended which disengages the power whilst the door is in the locked position.

 Finishes
 As standard all non-galvanised faces on ‘commercial’ roller shutter doors are finished in one coat primer and one coat
 silver hammer gloss. Non-galvanised faces on ‘industrial’ roller shutter doors are finished in one coat red oxide primer.

 Other finishes to the door can be obtained such as powder coating to any standard BS or RAL colour within the HPS200
 range. Aluminium curtains as an option can have an anodised finish.

Back to Industrial Doors