Industrial Doors // Roller Shutter Doors // Curtain Options

The roller shutter door curtain is constructed from fully interlocking laths which are retained by nylon, pressed metal, or cast iron end locks, riveted at both ends of every alternate lath to prevent lateral movement, complete with appropriate bottom rail. The following options, dependent upon application, are available:

 Standard 76mm concave lath
 A 76mm deep, concave profile, rolled mild steel galvanised section, suitable for most applications, available in 18, 20 & 22swg
 thickness, offering a high degree of security. Available in solid, perforated or plastisol styles, as illustrated.

 Standard 50mm flat lath
 A 50mm deep, flat profile, rolled mild steel galvanised section, available in 20 & 22swg thickness, the most commonly used
 alternative for commercial roller shutter doors.

 Aluminium 50mm flat lath
 A 50mm deep, mill finished extruded aluminium section available in 1.4mm thickness. Ideal for counters and servery hatches.

 Insulated lath
 A flat lath profile, mild steed galvanised section available in 24swg thickness, interlocked to create a double skin section, filled
 with 20mm thick polystyrene insulation. Ideal where temperature control between environments is of importance.

 Tube and link grille
 Constucted from galvanised mild steel or aluminium tubes and links fitted onto an 8mm diameter steel or aluminium bar giving
 an open ‘brick bond’ pattern. Ideal for shop fronts and counters, offering good airflow and visibility.

 ‘Fleur-de-lys’
 Constructed from tough injection moulded plastic and fitted onto a 6mm diameter aluminium bar, locked together star lock
 serrated washers at both ends of every bar. An aesthetically pleasing grille ideal for counters, bars and servery hatches.

Back to Industrial Doors