Industrial Doors // Sectional Overheads // Door Panels

Colours and finishes

Bone White RAL9002	White RAL9010	Magnolia RAL1015	Merlin Grey BS18B25	Goosewing Grey BS10A05	Pacific Blue RAL5003	Van Dyke Brown BS08B29	Regatta Blue BS18E53
Blue Grey BS18B17	Olive Green BS12B27	Aztec Yellow BS10E55	Sunset Red RAL3000	Gentian Blue RAL5010	Silver RAL9006	Moss Green RAL6005	Bamboo BS08C35
Khaki Green BS12B21	Forest Green RAL6002	Ocean Blue BS18C39	Poppy Red BS04E53

Outer Skin:
The outer skin is finished and coloured to match most contemporary building cladding.
Inner Skin:
The internal liner skin is finished in RAL 9010 white, polyester coated, stucco embossed galvanised steel as standard.

Thermal Bow

It should be noted that when a door is due to be positioned where it is likely to receive direct sunlight then dark colours should be avoided due to the potential of thermal bow. Contact us for further information.

Acoustics

The 40mm OSA insulated door panel gives sound reduction of (Rw) 25db. Please note; this is for the panel only, and does not include joints, i.e. a fully installed door.

Panel Options and Accessories

A range of windows in various sizes can be incorporated in the panel, the standard being 600 x 300mm with radiused corners. Each panel is fitted with pre-punched galvanised steel end caps and the top and bottom panels are finished with an aluminium retainer which holds the top and bottom EPDM seals. A range of locking options are available. Wicket doors are available 800 x 1800mm approx. 150mm above floor level, supplied complete with cylinder type locking.

Insulated Industrial

Insulated Industrial Fingersafe

Insulated Industrial European ‘C’ & ‘N’ Type

Windows	Bottom Seal Safety Edge	Top Seals	Bottom Seals	Security Viewing Window
Footstep Handles	Ventilation Grilles	Exhaust Ports	End Caps	Shoot Bolts
Side Locks	Panel Struts	Electric Operators	Panel Adaptor	Top/Bottom Retainer

Back to Industrial Doors