Industrial Shutters

Ideally suited to industrial applications, the curtain of the door is manually raised via a continuous haul chain which drives the fully sprung counter balanced roller barrel assembly. The roller barrel assembly is suspended by mild steel end plates that are either independently fixed from the side guides or with full length 'flag-post' angles to which the side guides are also secured. The spring assisted roller barrel is driven by a hand chain wheel mounted either directly at one end of the tube or via a series of reduction gears, dependent upon the size of the door.

Ideally suited for industrial applications that require frequent usage. All door components are identical to that of the manually operated 'hand chain' roller shutter door, except for the door being raised automatically by a 3 phase 415 volt electric motor in lieu of the hand chain wheel mechanism. The standard actuation method is via an up, down and stop push button station. A manual override continuous haul chain is provided for use in the event of a power failure. A single phase 240 volt option is available where site conditions dictate.

All electrical operated roller shutter doors can be fitted with any one of a combination of the actuation devices or safety features, as detailed below.

Important note:- When automating a roller shutter door it is also recommended that one of the following safety features is also included, to help prevent the door automatically closing on any obstruction/personnel.

Actuation Systems

Safety Systems